Akis User Manual

Quick setup using Mobile App (recommended)

1. Download app Lumisection from Google Play  or App Store

2. Open app and click Scan for Devices

3: Enter Wi-Fi name and password (optional), select Ticker you want to follow and choose a timeframe (5m, 15m, 1h, or 1d)

4: Hit Save to Device – you're done! Device will connect to Wi-Fi and update.

Lumisection app scanning for Akis devices Lumisection app Akis WiFi and ticker settings

 

Alternative way via web browser

1: Connect your phone or computer to device’s network Akis_XXXX

2: Open a browser and go to: http://192.168.4.1

3: Enter Wi-Fi name and password (optional), select Ticker you want to follow and choose a timeframe (5m, 15m, 1h, or 1d)

4: Hit Save – you're done! Device will connect to Wi-Fi

Akis web configurator for WiFi and ticker settings

 

LED Indicator Guide

The LEDs are numbered starting from the USB-C port side and show the current status of the device.

Normal Operation (Device is configured and connected to Wi-Fi)

All LEDs will display the same color, indicating the direction of the latest candle for your selected timeframe (5m, 15m, 1h, or 1d):

  • Green – The latest candle for the selected timeframe is green (price went up).
  • Red – The latest candle for the selected timeframe is red (price went down).

Setup & Diagnostic Mode (Device not yet configured or disconnected)

Each LED represents a specific function:

  • LED 1 – Power Indicator
    • Always on when the device is powered.
  • LED 2 – Wi-Fi Status
    • Blue – Attempting to connect to Wi-Fi
    • Red – Failed to connect/Wi-Fi not configured
    • Green – Connected successfully
  • LED 3 – Reserved
    • Will only show green or red during Normal Operation mode
  • LED 4 – Data Update Indicator
    • Short blue blink – New data update received

Akis LED indicator guide

Factory Reset

If the device becomes unresponsive — with no Bluetooth or Wi-Fi hotspot available — you can perform a factory reset using the small reset button located between the LEDs.

To reset the device:

  • Press and hold the reset button for 10 seconds.
  • All LEDs will turn blue, indicating that the factory reset process has started.

After the reset:

  • The Power LED will turn green.
  • The Wi-Fi LED will turn red, signaling that the device is ready for setup.

Power Supply

Input: 5V DC

Current: Minimum 1A

Connector: USB-C

Power Source: USB Wall Adapter, Power Bank, or USB Port